<tr id="biwzd"><nobr id="biwzd"><ol id="biwzd"></ol></nobr></tr>

        <tr id="biwzd"><small id="biwzd"><delect id="biwzd"></delect></small></tr>
          <output id="biwzd"><track id="biwzd"><nav id="biwzd"></nav></track></output>

              聯系我們

              濟南隆利液壓裝置有限責任公司

              郭董事長: 15966607000

              銷售部叢經理:18615255087

              座機:0531-86408296

              地址:中國 山東 濟南市市中區 臘山路18-16號(臘山工業園)

              液壓插裝閥體積小、成本低

              瀏覽量:?? 來源:http://www.granitelodge2028.com??作者:山東液壓閥廠家

              液壓插裝閥體積小、成本低

              Small size and low cost

              批量生產的對用戶益處在閥塊還未裝配線終點時就已顯現.采用插裝閥設計的整套控制系統可為用戶大大減少制造工時;該控制系統的每個元件在組裝成集成閥塊前就可進行獨立測試;集成塊在發給用戶之前就可進行整體測試.

              The benefits of mass production for users are already apparent before the end of the assembly line. The whole control system designed with cartridge valves can greatly reduce the manufacturing time for users; each component of the control system can be tested independently before it is assembled into an integrated valve block; and the integrated block can be tested integrally before it is sent to users.

              由于必須安裝的元件和連接的管路大大減少,為用戶節省大量的制造工時.由于系統污染物的減少,泄漏點的減少和裝配錯誤的降低,使可靠性顯著提高.插裝閥的應用實現了系統的高效、方便.

              As the number of components and connecting pipes that must be installed is greatly reduced, a lot of manufacturing time is saved for users. As the system pollutants are reduced, leakage points and assembly errors are reduced, the reliability is significantly improved. The application of cartridge valves achieves high efficiency and convenience of the system.

              以輪式裝載機為例,采用插裝閥集成塊來代替故障不斷、難以診斷和維修的動力傳動控制裝置.原有控制系統有60多個連接管件和19個獨立元件.用來替代的整體特制集成塊上只有11個管件和17個元件.體積為12 x 4 x 5立方英寸,是原系統所占空間的20%.采用插裝閥的特點如下:

              Taking wheel loader as an example, cartridge valve integrated block is used to replace the power transmission control device which is troublesome and difficult to diagnose and maintain. The original control system has more than 60 connecting pipes and 19 independent components. There are only 11 pipes and 17 components on the whole special integrated block to replace. The volume is 12 x 4 x 5 cubic inches, which is the original system. It occupies 20% of the space. The characteristics of cartridge valves are as follows:

              減少安裝時間 減少泄漏點 減少易污染源 減少維修時間(因為插裝閥無需取下管接頭配件即可更換)

              Reduce installation time, reduce leakage point, reduce pollution sources and reduce maintenance time (because cartridge valves can be replaced without removing fittings from pipe joints)http://www.granitelodge2028.com


              JAPANESE熟女熟妇55 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>